找回密碼
 註冊
查看: 4494|回覆: 21

[野戰/槍械] SIG Pro 2022 and Beretta PX4 Storm

[複製鏈接]
發表於 2011-8-4 01:59:54 | |閱讀模式

登入後,內容更豐富

您需要 登錄 才可以下載或查看,沒有賬號?註冊

×
本帖最後由 made_in_HK 於 2011-8-4 03:15 編輯


                               
登錄/註冊後可看大圖

Who has this gun?  This is a S.I.G. Pro 2022 produced by SIG Sauer (Americans like to pronounce it as Sig, but it's really named S I G Sauer - Schweizerische Industrie Gesellschaft).  Excellent polymer frame pistol.  Why polymer frame?  Now a day, plastic can withstand heat much better than years past, and it saves a lot of weight.  This 2022 model stands out among other polymer frame models mainly because it's considered very accurate and reliable by many shooters.  I personally love the way how it has a short recoil system, meaning less kick after each firing.  Also, this gun is perfect for those who have smaller hands, as it comes with a small grip.  However, shooters can change the grip (comes with another bigger grip) if wider ones are desired.  I was torn between this and a Beretta PX4 Storm, which is also an excellent, and BEAUTIFUL polymer frame pistol.  

                               
登錄/註冊後可看大圖

The PX4 Storm utilizes a rather unique system called "rotating barrel"... it helps minimize the recoil and lower the risk of jamming.  



                               
登錄/註冊後可看大圖


Again, both are excellent polymer frame pistols, however, I personally found the SIG Pro 2022 is just a bit more accurate and easier to shoot for me.  Does anyone have any experience with these 2 guns that you want to share?  
發表於 2011-8-5 13:43:20 |
Tried Beretta 8000 before, don't like it..... so as this PX4

Haven't handle any 2022 so couldn't give real comment however it looks much better than the awful PX4.

For SIG pistol I prefer P226 or P228. If talking about pistol with polymer receiver, then Austrian Glock will be my only choice.
 樓主| 發表於 2011-8-5 14:08:53 |
Gino17 發表於 2011-8-5 13:43
Tried Beretta 8000 before, don't like it..... so as this PX4

Haven't handle any 2022 so couldn't  ...

I have tried the Glock, but didn't like the recoil.  What did you not like about the PX4 Storm?  Just curious.  

The SIG 226 is the Navy SEAL's top choice.  My friend has one and I shot it before.  Didn't like it much because the grip was too wide for my liking, and I prefer polymer frame over steel.  

Thanks for sharing your opinion.  :)
發表於 2011-9-9 16:55:34 |
this gun is hong kong police CID gun ???
 樓主| 發表於 2011-9-11 08:21:57 |
ivan1986909 發表於 2011-9-9 16:55
this gun is hong kong police CID gun ???

no... I think they use either the Glock 17, 19, or SIG P250.  The SIG P250 is similar to the SP2022, but it's designed to be used by both left and right hand shooters (ambidextrous).  And the main difference between the P250 and SP2022 is that the P250 is a DAO (double action only) gun- no hammer.  
發表於 2011-9-19 21:19:51 |
多謝分享
發表於 2011-9-20 23:53:29 |
very cool! I also want this! I have one WG CO2 8" 左輪瓦斯鎗 黑色
 樓主| 發表於 2011-9-21 04:52:35 |
本帖最後由 made_in_HK 於 2011-9-21 04:57 編輯
katee1hk 發表於 2011-9-20 23:53
very cool! I also want this! I have one WG CO2 8" 左輪瓦斯鎗 黑色


These SIG and Beretta are real guns.  
For CO2 guns, I have two, and my favorite one is the Umarex HK P30 (shoots pellets).  It's quite powerful.   From 10 feet away, I can shoot through 140 pages of a phone book.  The other one is a WinGun Colt Defender (shoots bb balls).
I know Umarex also have a line of 左輪... they're about $200 USD.  
Umarex's CO2 guns are great in that many of them are made in Germany, and the Germans know their weapons.  
發表於 2011-12-21 13:25:50 |
made_in_HK 發表於 2011-8-5 14:08
I have tried the Glock, but didn't like the recoil.  What did you not like about the PX4 Storm?  J ...

C-hing, firearms is just like pretty girls, 人人觀點唔同,各花入各眼啦.

As mentioned in my previous reply, I tried 8000 before but don't like the looking/feeling and recoil of it. PX4 is similar to it so, no not my cup of tea.

I have compared & shoot several 9mm pistol side by side, CZ-75, SIG P226 and Glock 17.
Glock 17 gives me a most soft recoil impulse feeling as well as it's low muzzle flip, second to it is my other trusty partner, SIG P226 and CZ75 is in third place only.

If talking about the captioned Italian brand pistol, Elite IA is the only Beretta I like, in fact it took me a while to choose either a SIG 226 or Elite IA several years ago.

發表於 2012-1-25 15:55:42 |
師兄們,其實PX4是否M9入替型號?
 樓主| 發表於 2012-1-26 01:12:37 |
ivan1986909 發表於 2012-1-25 15:55
師兄們,其實PX4是否M9入替型號?

否... PX4 Storm 的槍管是一個獨特的設計, 槍架是高分子塑膠 ..
發表於 2012-1-26 16:16:55 |
made_in_HK 發表於 2012-1-26 01:12
否... PX4 Storm 的槍管是一個獨特的設計, 槍架是高分子塑膠 ..

Oh i see...thanks bro
發表於 2012-6-1 16:08:06 |
回應 made_in_HK #1 的帖子

px4 is an art piece especially  at the rotating barrel..very beautiful
發表於 2012-7-10 07:25:46 |
both of them look nice but still the sig is better.
發表於 2012-8-3 21:27:11 |
Well, similar range I'd preferred Steyr M-A1. Handy and convenient... plus smart looking :)


                               
登錄/註冊後可看大圖
 樓主| 發表於 2012-8-4 00:21:02 |
903idcop 發表於 2012-8-3 21:27
Well, similar range I'd preferred Steyr M-A1. Handy and convenient... plus smart looking :)

The person who was responsible for the design of Steyr M-A1 is the head of Caracal, which in my opinion is also a great firearm.  Unfortunately for me, both Steyr and Caracal cannot be sold here where I reside.  


                               
登錄/註冊後可看大圖
發表於 2012-8-4 02:40:54 |
made_in_HK 發表於 2012-8-4 00:21
The person who was responsible for the design of Steyr M-A1 is the head of Caracal, which in my op ...

Why is that? Due to license issue? Where dovyou live? Or else, get an Airworthiness version, heehee
發表於 2012-8-5 03:31:27 |
本帖最後由 aloharicnsa 於 2012-8-5 03:33 編輯

I used to own a ST220 - never like it (top heavy) - sold it after2 months.


                               
登錄/註冊後可看大圖



As for the PX4 - it is very similar to Glock or XD - plastic frame (at least the grip) and metal slide.

Shot it a few times, but I like my Glock 34 and my old, old 92FS better...



                               
登錄/註冊後可看大圖


Beretta 92 FS


                               
登錄/註冊後可看大圖


My Glock twins - G34 (9 mm) and G21SF (45ACP)
發表於 2012-9-19 00:10:19 |
回復 made_in_HK #1 的帖子

太強了~
感謝分享~
發表於 2012-10-1 00:53:27 |
個外形真係....唔係咁接受度..... SIG 都226 XP

Archiver|聯絡我們|141華人社區

GMT+8, 2024-4-19 10:50

Powered by Discuz! X3.5

© 2001-2024 Discuz! Team.

快速回覆 返回頂部 返回列表